At some point in our lives most of us have the same
thoughts: “Man, a Rolex is expensive” and “maybe I should just get a replica.”
That’s where this specific watch’s journey began. On a sunny day in Juarez,
Mexico back in 1998, a 27-year-old soldier named Chris Vail was shopping in the
market with his wife. Chris had already made several excellent purchases: a hand-carved
marble chess set, a polyester soccer jersey, and a steak dinner for two, but he
had a few pesos left rattling in his pocket. Then something caught his eye. “Ooo!
Look at the colors!” he exclaimed. A few pesos were exchanged, and Chris now
owned a not-so-convincing fake two-toned Rolex 16613. A watch that was made in China, and sold in Mexico, was about to take its first steps onto United States soil.
Fast-forward 16 years, and we find Mr. Vail in a very
different place. He is now watch enthusiast “Doc Vail,” a forum regular, and
the founder of the Lew & Huey Watch Company. Two very popular mechanical
watches have been released, two more are in production, and another two are in
development. Coincidentally, that embarrassing two-tone replica was still
hanging around Chris’s watch box. It holds some sentimental value, and he
didn’t want to discard it, but what is a man to do? How does one dispose of a
Mexican Rolex (“Molex”)? By making it a prize, of course. Chris held a contest
on Watchuseek’s Affordable Forum. This is where I take over the story, as I was
the lucky winner.
I’m John Zanatta, aka jelliottz, aka JZ, and I’m a regular
on the forum. I’m also one of those guys who will take a perfectly good watch,
take it apart, swap parts in and out, throw some bits in the oven, attack others
with metal files and sand paper, dunk still more parts in coffee, and the put
them all back together in what usually turns out to be a pretty cool
“vintagized” piece. Chris wanted the Molex to get a new lease on life, and he
tapped me for the job. I decided it would look good with snowflake hands and matching dial. I ordered the dial and hands from Ken at www.rafflestime.com.
He has great prices, an excellent selection, fast shipping, and amazing
customer service. These dial and hands are listed under parts for a
DG2813. The DG is a clone of the Miyota 8215 which is the same movement
in the Molex.
Here are the steps that I took to go from Molex to Moflake
in some kitchen table modding.
Before we start, here are the tools that I use. I use the
term “tools” loosely. There are specific tools for watch modding, and I don’t
own any of them. Instead, I performed watch surgery using only: Gorilla tape, several
screw drivers, an awl, two ball point pen ink cartridges, and tweezers.
Step 1: Tear off a piece of Gorilla tape approximately 6” in
length. Roll it up with the sticky side out. This is your case back opening
tool. Stick the tape to your case back. Allow it 5-10 seconds to bond with the
metal. Now slowly apply pressure and twist counter clockwise.
Step 2: Find the stem release button. It is located in
different places for different movements. The movement in the Molex is is a
clone of the proven workhorse Miyota 8215 automatic movement. The release is
located just left of the stem. Pull the stem into the time setting position and
set the time to 12:00 pm (I will explain this in a minute). Now gently press
the release button with your awl (or paper clip, thumb tack, etc,) while
pulling the crown out. Don’t press to hard on the release button or pull to
hard on the crown. It should be a gentle process.
Step 3: Remove the movement, reinsert the stem, and set the
time to 12:00 pm. Do not set it to 12:00 am. You don’t want to remove or
set hands when a watch is attempting a date change.
Step 4: Cover your dial with a thin piece of paper, tissue
paper for example, before removing the hands. Now place a screw driver (or hand
puller if you’re using real tools) beneath each side of the second hand. Lift
in an upward motion. Be careful not to press inward. Once the second hand is
off, you can remove the hour and minute hands at the same time with the same
method. (Disclaimer: I don't use a
movement holder. Most people prefer to. If I were to buy actual tools, this is
the first piece I would buy.)
Step 5: Loosen the screws (with approximately a ½ to ¾ turn)
which hold the dial feet in place. Lift the dial off the movement. Remove the
dial spacer held in place by the dial feet. You can slide it off using
tweezers. This will be used on the new dial. If you forget this step, your stem
will be out of alignment.
Now you have taken your watch apart, and we will begin aging
the dial and hands to give it a more vintage feel. The watch from Chris already
had quite a lot of character: scratches and fading on the bezel, dings in the
case, and some brass showing through near the crown guards. The case looks worn
and well loved, but the dial and hands are brand new. We need to catch them up
with the natural aging of the case.
Step 6: Cover a baking sheet with foil. Place your dial on
the baking sheet. Set your oven to 450 degrees Fahrenheit . When the oven is
heated, place to backing sheet with dial inside. This is where it gets tricky.
There is a fine line between vintage dial and burnt cookies.
Step 7: Check the dial every 60 seconds. Dials can take
anywhere from 3 minutes to 30 minutes to turn color depending on the
temperature and materials used to make it. It’s not an exact science. I’m going
for light vintage. As soon as the dial begins to turn, I’m going to remove it.
The dial will continue to change once removed until it starts to cool down. Do
not touch it yet. This is a piece of metal that was in a 450 degree oven.
Needless to say, it is HOT.
Step 8: Now repeat the same process with the hands. In my
experience, hands don’t turn as quickly as a dial. This is why I do them
separately.
Optional – add coffee to the baking process. You cover the
dial and hands in coffee and put them back in the oven. Let the heat evaporate off the
coffee. You will be left with dark spots and texture. You can also dry them
under a lamp if you don’t want to put the dial back in the over. I would
recommend using the lamp if your dial is border line over-baked. My dial was in
for 8 minutes (checked every 60 seconds), and my hands were in for 15.5 minutes
(checked every 60 seconds).
Step 9: Bleaching
the bezel insert is easy. You drop it into concentrated bleach and wait. That's
it. Keep an eye on it just like the dial. You can always bleach more, but you
can't put color back.
We’re almost to the finish line. Now it’s time to put
everything back together.
Step 10: Put the dial spacer on the freshly baked dial.
There are small cutouts that should match up to the dial feet. Place the dial
feet into their respective spots, and tighten the screws back the ½ to ¾ turn
you loosened them.
Step 11: Remember when we set the crown to 12:00 pm? That’s
how we’re going to install the hour and minute hands. This way you have a date
change (if using a date window dial) at midnight. No one likes an early or late
change. Use the tweezers to place the hour hand at 12:00. Use the open end of
the ink cartridge (or hand pushers) to set the hand into its spot. A little
pressure pressing down should seat it perfectly. Take a look at it from the
side to verify it is sitting level. You don’t want it at an angle as it could
interfere with the minute hand or drag on the dial.
Now use your second ink
cartridge to hold the minute hand. Place the pointed tip into the open tube.
Now you may align the hand opening in its respective spot. Use the same gentle
pressure with the other ink cartridge (or hand setter) to press down and seat
the minute hand. Check its profile view to again verify that it is level. Your
crown should still be in the time setting position. Slowly rotate the hands
around the dial for two full rotations. You will be checking for two things: 1)
the hour and minute hand do not bump into each other, and 2) the date changes
at 12:00 (if you have a date window).
Step 12: Now it’s time for the second hand. Move your hour
and minute hands to the bottom half of the dial. You don’t want them in the way
while trying to do this. This one can be tricky. Some people like to use a loupe
for better vision when doing these. The pinion you’re attempting to mount it
upon is very fine. Take your time. Don’t force it. If you find yourself stuck,
take a break and revisit it. You don’t want to snap it off. Now begin the same
way you did the minute hand. Place the seconds hand tip into the open end of
the ink cartridge. Use this to hold the hand and align it over the seconds
pinion. As you set it down, you will feel the tube in the second hand make
contact with the pinion and catch. This means you’re on target. Keep it level,
and use the other ink cartridge to press down on the hand. It should settle
slightly into position as you push down. If you think you have it set, push
your crown in to start the movement. You should now see your second hand spring
to life. If it doesn’t, try again. Once my second hand is in place, I do
another two rotations of all the hands to make sure they don’t bump at any
point on the dial. If there’s no overlap, stop at 12:00 pm (avoid the date
change) and remove the stem.
Step 13: Now place the movement back into the watch case,
and reinsert the stem. Close up the case back. You can use the Gorilla Tape
ball to tighten just like you did to open. Set the time on your watch, and
screw down the crown.
Step 14: Lastly I removed the faux Rolex insert on top of
the crown. It was a little piece of plastic with an engraved coronet. I used
the awl to quickly pop it out.
Congratulations on modding your first watch, and welcome to
the club!
vedere di piu
svizzera rolex e
Breitling Chrono Avenger
vedere di piu 
